Studio Light & Flash Accessories features: With this phone camera selfie ring light here, you can always take wonderful pictures yourself. The supplementary light is equipped with 3 different colors of brightness to satisfy you as much as possible. Features Color:White. Material:ABS, acrylic. Size: 26x26x3cm / 10.22x10.22x1.18inch. LED lamp beads: 48 SMD 5050 RGB, 2 60 SMD 2835. Input voltage: DC5V / 0.2V (recommended power supply output current is 3A). Lamp brightness: 24-26lm. Input interface: USB. Mode: 8-level static brightness adjustment 8-level dynamic adjustment, 13 kinds of static 13 kinds of dynamic switching (manual), 26 kinds of modes cyclic switching. Working current: mixed color light 5V, 2A, RGBW 5V, 1.3A, blue monochromatic light/red monochromatic light/green monochromatic light each 5V, 0.7A, warm monochromatic light 5V, 1.6A, white light 5V, 1.8A. frequency: RF 433M (can pass through the wall). distance: > 12 meters. Line parameters: total length of 2 meters, input No. 22 two-core wire (loadable 3A current), output No. 26 six-core wire (loadable 3A total current). White light color temperature: 6500K. Warm white color temperature: 3200K. Light color: Red: wavelength 620-625nm, luminous flux 600mcd/Lm. Green: wavelength 520-525nm, luminous flux 1000mcd/Lm. Blue: wavelength 460-465nm, luminous flux 400mcd/Lm. The tripod is completely made of plastic with rubber feet and will not slide on a smooth surface. Different colors of natural light illuminate your beauty on different occasions. Lightweight and portable design: easy to use and carry when you are traveling or working outdoors. Suitable for cameras, gimbal stabilizers, photography lights, etc. Can be put in a pocket. It is for traveling or outdoor shooting.