The VL53L0X is a time-of-flight ranging system integrated into a compact module. This board serves as a carrier for the VL53L0X, and we recommend reviewing the VL53L0X datasheet before use. The VL53L0X utilizes ST's FlightSense technology to accurately measure the time it takes for emitted pulses of infrared light to reach the nearest object and reflect back to the detector, functioning as a small, self-contained lidar system. Ranging data is accessible via the sensor's I2C interface, which is also used for configuration. The sensor includes two additional pins: a shutdown input and an interrupt output. The VL53L0X is a high-performance IC, but its small, leadless LGA package can be challenging for typical hobbyists or students to handle. It operates at a recommended voltage of 2.8 V, which may complicate interfacing with microcontrollers running at 3.3 V or 5 V. This breakout board simplifies integration while maintaining a minimal footprint. Key features: - Regulated 2.8 V output providing up to nearly 150 mA for external components (can be used as a 2.8 V input if the internal regulator is bypassed, with VIN disconnected) - VIN: Main power supply input from 2.6 V to 5.5 V; SCL and SDA level shifters pull I2C lines high to this voltage - GND: Ground connection; requires common ground with power supply and I2C controller - SDA: Level-shifted I2C data line (HIGH = VIN, LOW = 0 V) - SCL: Level-shifted I2C clock line (HIGH = VIN, LOW = 0 V) - XSHUT: Active-low shutdown input; pulled high by default to enable the sensor. Driving low places sensor in hardware standby (not level-shifted) Color: Purple + black Material: Metal Size: 25 x 12.2 mm Package Contents: 2 sets of Ranging Sensor Module Note: The package includes only the items listed above. Other products are not included. Lighting and display differences may cause slight variations between the product color in images and the actual item. Measurement may vary by +/- 1-3 cm.