Magnetic Enhancement: For resin 3D printers, we have enhanced the magnetic force of the magnetic base. which allows 3D printers to print models with spring steel plate firmly attached to the magnetic base without falling off and causing print failure. Robust and stainless steel material: The magnetic printing platform is made of high quality steel material and has good elasticity. After bending and removing the model, it can be quickly returned to its state and reused. Size information: The size of the magnetic steel plate is 225x128mm, for 2. Due to the thickness of the product itself, the printable height of the 3D printer shrink by 3.8mm. At the same time, after installing the magnetic printing platform, you need to re-leveling the 3D printer for excellent printing results. handle design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform. Installation Tips: First clean your build plate very well, let it dry, connect your magnet to the plate, let it sit for a while so it is fully seated, then install the spring steel plate on the magnetic base, last reset the printer's leveling settings to start printing. It is recommended to print a spacer so that the Z- can be reset to zero normally. size: about 225 x 128mm Material: steel colour: silver Package Contents: 2 x steel plate 2 x soft magnetic sheet Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.