Why do consumables need to be dried: If the consumables are damp, contaminated, or improperly stored, they not only affect the printing effect, but also cause a series of problems such as , drawing, clogging, rough , and reduced interlayer bonding strength, and also cause waste of consumables and losses. Super large space: Larger volume, support simultaneous drying of 2 rolls of 1kg consumables, meeting the needs of users to print and dry two printers at the same time. 360-degree hot air circulation heating: The heating plate heats up quickly, and the built-in circulation fan performs 360-degree hot air circulation in the cavity, which is evenly heated, effectively dries the consumables, and improves the printing effect. Wide compatibility: It is compatible with 99% of 3D printing consumables on the market, can be heated to 70 degrees, and can dry engineering consumables such as PA, PC, and ABS. Display screen: Real-time observation of humidity and temperature, countdown display of drying time, so that you can grasp the drying situation at any time, and the heating time can be 0-24 hours, which can be freely set to allow the consumables to be fully dried. Moisture-proof and dust-proof, safety protection: sealed structure, desiccant can also be built-in (desiccant is not included), and there is no need to worry about the consumables damp even if the machine is not turned on. Parameters: Maximum capacity:2*200*73(H) Rated power:AC100-240V 50/60Hz Output power:DC24V-3A Heater power:60W Supported consumables:2x1KG/2x500g/1x250g/1x200g Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on. Voltage:AC100-240V Color:White Material:plastic Package Contents: 1 * drying box 1 * power adapter 1 * spindle 4 * tube 6 * plug Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.