Feature:1. The 3flute design can fully complete the cutting and greatly improve the cutting effect of the tool, making it smoother and cleaner.2. Suitable for installation on trimming machines, electric wood milling machines, hanging routers, and CNC cutting machines with 1/2in handle.3. Made of highquality carbide materials, high temperature and corrosion resistance, and can be used for a long time.4. The blade and straight shank are smooth and free of burrs, and do not stick to the knife during use.5. Suitable for milling of soft and hard solid wood, density board, multilayer board, particle board and other boards.Specification:Item Type: 3-Flute Milling CutterMaterial: CarbideModel: AK47-1/2x6x20-3TTotal Length: Approx. 70mm / 2.8inShank Diameter: Approx. 12.7mm / 0.5inBlade Length: Approx. 20mm / 0.8inBlade Diameter: Approx. 6mm / 0.2inEffective Cutting Edge Number: 3Applicable Board: Soft and hard solid wood, density board, multi-layer board, particle boardApplicable Equipment: Trimming machine, electric wood milling machine, hanging router, CNC cutting machine (only applicable to 1/2in tool holder).Package List:1 x 3-Flute Milling CutterNote:1. Check the power and stiffness of the machine tool to ensure that the required milling cutter diameter can be used on the machine tool.2. The overhang of the tool on the spindle is as short as possible to reduce the impact of the milling cutter axes and the position of the workpiece on the impact load.3. Use the correct tooth pitch of the milling cutter suitable for the process to ensure that there are not too many blades that mesh with the workpiece at the same time and cause vibration during cutting. On the other hand, ensure that there is enough when milling narrow workpieces or milling cavities. The blade engages with the workpiece.4. Make sure to use the feed per blade so that the correct cutting effect can be obtained when the chip is thick enough to reduce tool wear. The indexable insert with positive rake angle groove shape is adopted to obtain a smooth cutting effect and the lowest power.5. Select the diameter of the milling cutter suitable for the width of the workpiece.6. Choose the correct entering angle.7. Place the milling cutter correctly.8. Follow the rules of tool maintenance and repair, and monitor tool wear.