4V210-08 Solenoid Air Valve 2 Position 5 Port Pneumatic Control Valve (DC12V) Features:  . 2 Position 5 Port Solenoid Air Valve. Good seal, safe and reliable e. Compact size, easy to assemble and disassemble. Stable performance, long service life. Specification: Model: 4V210-08 Use fluid: Air (filtered through 40 micron screen) Actuating mode: Internal guide mode Lubrication: No need Use pressure: 1.5-8.0kgf/cm2 Maximum pressure: 10.5kgf/cm2 Working temperature: 5~50℃ Voltage range: +15% -25% Power consumption: AC: 5.4VA, DC: 2.5W Insulation: F CLASS Service life: About 10 million times under normal use Maximum actuating time: 0.05sec Protection class: IP65 (DIN40050) Voltage: DC 12V/24V (Optional)   Instructions: 1. Check the components before use, whether they are damaged during transportation, then install and use them. 2. When installing, please pay attention to the direction of gas flow and whether the nozzle is correct. 3. When iInstalling, pay special attention to whether the voltage meets the requirements, the whole machine debugging, it is recommended e manual device debugging, and then power-on debugging. 4. Please pay attention to dust prevention and suggest installing muffler at the exhaust port. 5. When connecting the pipeline, pay attention to the winding of the stop strip not to exceed the tooth end surface, and pay attention to the elimination of pipe joints, metal particles in the pipe, dust and oil pollution. Package List: 1 x Solenoid Air Valve Note:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.