57 Integrated Close Loop Hybrid Servo Stepper Motor Set with Coding Function DC24-50V Features: 1. Adopt advanced 32-bit special motor control digital signal processing chip and vector close-loop control technology. 2. Step-and-loop close-loop circuit system can improve motor output the moment of force and speed without losing motion synchronization. 3. Adjust the current according to the load to reduce the motor temperature rise. 4. Suitable for various mechanical load conditions (including low rigidity pulleys and pulleys) without adjusting the gain parameters. 5. The motor runs smoothly and the vibration is slight, which improves the dynamic performance of acceleration and deceleration. 6. 0 speed static capability without vibration after positioning is completed. 8. Built-in position and alarm output signals for easy PC monitoring and control. 9. The position tolerance alarm function guarantees safe operation of the processing equipment.   Specification: Condition: Motor Model: 57HSE2N-D25 Material: Carbon Steel + Copper Power Supply: DC24~50V Output Current Peaking Value 6.0A (varies according to load) Logic Input Current: 7~20mA Pulse Frequency: 0~200kHz Suitable Motor: 57HSE Encoder Line: 1000 Insulation Resistance: ≥500MΩ Cooling Method: Natural Cooling or Use of An External Heat Sink Working Conditions: Environment to Avoid Dust, Oil Mist and Corrosive Temperature: 0~50℃ Humidity: 40-90% RH Vibration: 5.9 meter / s2Max Storage Temperature: 0~50℃ Motor the Moment of Force: 2N.m Rated Current: 4A Shaft: 8mm Maximum Speed: 2000rpm Rated Speed: 1000rpm Impulse Response Frequency: 200kHz.   Package List: 1 * Drive 1 * Stepper Motor 2 * Connecting Cables 1 * User Manual