This is a set of fine quality turning tool holder, perfect profiling bar for semi-finishing and finishing operations. Fine toughness and hardness, long service life. Fine low temperature impact toughness, improved the surface gloss of the cutting pieces. Features: Profiling bar for semi-finishing and finishing operations. Fine toughness and hardness, long service life. It can reduce the tool grinding cost and improve the cutting efficiency. Fine low temperature impact toughness, improved the surface gloss of the cutting pieces. Fine grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing. Practical and a variety of processing environments, even in very dirty environments. Note: Open the tool case carefully. To avoids injury do not touching shape edge. Use safely precaution such as guards and eye protection before using the tool. Exchange a tool when it occurs problems such as a noise vibration and a . Specifications: Name: Turning Tool Set Model: MGEHR1010-2 / SER1010H11 / SCLCR1010H06 / SDJCR1010H07 / SDNCN1010H07 / S10K-SCLCR06 / SNR0010K11 Material: 42cr Package size: 220 * 150 * 40mm / 8.66 * 5.91 * 1.57in Package weight: 778g / 1.72lb No./Model/Shank Diameter(mm)/Overal Length(mm)/Insert 1 MGEHR1010-2 10 100 MGMN200 2 SER1010H11 10 100 11 ER 3 SCLCR1010H06 10 100 CCMT060204 4 SDJCR1010H07 10 100 DCMT070204 5 SDNCN1010H0710 100 DCMT070204 6 S10K-SCLCR06 10 125 CCMT060204 7 SNR0010K11 10 125 11 IR Package list: 7 * Holders 7 * T8 Screw Driver 7 * Inserts