brand new and high quality ADXL345 connect to for or MCU via Spi. ADXL345 is a 3-axis accelerometer with optional measurement range of 2 g, 4 g, 8 g or 16 g, 13-bit resolution. The ability to measure both dynamic acceleration due to motion or shock, as well as stationary acceleration, such as gravitational acceleration, allows the device to function as a tilt sensor. It can be directly installed on the 36 stepper motor, which is convenient to fix. One end of ADXL345 V1.0 cable adopts ZH1.5 6Pin plug, and the other end adopts 2.54mm 6*1Pin plug 70cm. This facilitates compatibility with motherboards that do not have ADXL345 sockets. And the wire is 70cm, which is convenient for users to DIY. This product currently only supports Klipper firmware. We have designed a 5V power supply that is more suitable for most motherboards. Model: ADXL345 V1.0 Power: 5V Size: . 5.017x3.416cm/1.98x1.34in Note: The ADXL345BCCZ three-axis accelerometer needs to have a stable installation plane, otherwise it will affect its measurement accuracy. Note that the board is powered by 5V, and 5V and GND cannot be reversely connected. Colour:black Material:Plastic+metal Package Contents: 1 x ADXL345 V1.0 Accelerometer Board 1 x Cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.