1. Supports writing the address and parameters of lamps with multiple DMX chips. 2. LCD interface display, easy to operate. 3. It can be powered by external power supply or built-in key battery during operation. 4. Supports DMX console simulation function, and can support 18 channels to be controlled at the same time. 5. A variety of test effects are provided for users. Supports 0-255 grayscale settings. Built-in 4000mh lithium battery Output port:Single data output (RS-485 / 5V-TTL) Pixel driven:Upper 4096 channels Output power:Less than 10W Working temperature:-15℃-50℃ Relative humidity:less than equal 50% RH IP grade: IP20 (Prevent people from touching the components inside electrical appliance, prevent object which diameter is more than 12.5mm from getting in, no special protection to water or moisture.) Net weight:0.5 Kg Size:L 173 x W 88 x H 38.5 (mm) Working environment: 1) Please do not install the controller in magnetic, high pressure, high temperature or seriously wet environment. 2) Please do connect the earth safely in order to reduce risks of fire and damage which cause by short circuit. 3) Please ensure AC100-240V power supply is used, and same polarity is connected between transformer and controller in order to guarantee the proper supply voltage. 4) No waterproof function in the control system, please pay attention on rainproof and waterproof during installing. Due to different product batches, the words on the product may be different, which will not affect the use. Colour:Black Material:Iron Package Contents: 1 * BL321 DMX512 stage lamp address writer controller