1Use the G-Code code (universal machine language) through free open source software. You can design the vector graphics you need and then engrave them with a laser machine. 2Provide an independent research and development app, and search for Cubiio in the application mall to install. Specify the pattern or input text, place the engraving target in front of the laser lens, adjust the position, and activate the button. 3In the preview mode, the laser light is irradiated onto the target with a weaker intensity laser, and the pattern is slightly corroded to the target. This way we can adjust the position and size as well as the angle to ensure that the final engraving effect is what you want. 4Provide Batch (batch task) function, you can repeat the engraving or automatically switch the next pattern, so that you can easily carry out large - scale engraving tasks. 5The product is equipped with goggles, and the laser machine always wears goggles while working. But it is important to emphasize that even if you use goggles, don't use your eyes to see the laser radiation. 6A password is required before each run, and only authorized personnel are allowed to use the laser machine. 7LED light indicates when the laser is powered on and running. 8quipped with a sensitivity three - axis accelerometer, the laser will be turned off immediately during accidental movement during operation to prevent laser engraving failure or damage to people and surrounding objects. 9The laser should work in a suitable environment with sufficient heat dissipation. If the internal temperature approaches a destructive threshold, the laser will automatically shut down.