Amp -Current Sensing Sensor Highlights Generic Brand Current Sensing Sensor Description: Current sensing range: DC 0-50A; Dimension: 89x71.5x50mm / 3.5x2.8x1.97in DC current detection digital display sensor module It is used to detect the current value in DC circuits, output the corresponding linear voltage value and display the value of current through the digital tube. If the current exceeds the preset value, the module relay operates and delays the recovery, which can avoid the current fluctuation time. It is convenient to directly control the equipment switch and achieve automatic control. specification: Working temperature: 0-65 (need to customize -40 ~ 75 C, please contact online customer service) Humidity range: 10 ~ 95% RH (non-condensing) Analog signal: 0 -10V Installation method: as picture shown Switching signal: relay output, fastest response time (300mS) Delay setting: delay setting range: 0-99.9S, module default: 3S With base: C45 standard rail Threshold current and delay setting method: 1. Press and hold the SET button for 3-5 seconds to release. The digital tube enters the current threshold setting state. The last digit of the number tube flashes. 2. Use the + or - key to set the current threshold, then click the SET key to perform the transposition (that is, the flashing state is forward). 3. When finished setting, press and hold the SET button for 3-5 seconds and release. The digital tube returns to the initial screen (000), indicating that the adjustment has been made successfully. 4. Hold down the SET key and the module will automatically enter the time setting interface. See 6.2 and 6.3 for setting method. (The default interface for time setting is: 03.0) Package includes: 1 Piece Current Detection Module