1Intelligent automatic pressure regulation, turn on the power switch and the water outlet valve switch, start to work, close the water outlet valve switch, the pump will automatically power off and stop working. 2By setting the overpressure automatic pressure relief device on the pump body, the structure is simple, and there is no need to set a pressure relief valve on the water pipe, which simplifies the pipeline connection. 3Made of good quality cast iron and steel, it has oil resistance, heat resistance, acid resistance, alkali resistance, corrosion resistance and abrasion resistance. 4Small size, small current, high pressure and low noise, extremely efficient, very low current draw and offer high capacity output. 5It is used to pump flowing liquid, and can transport some difficulttoflow media, easy and convenient to operate. Item Type: Diaphragm PumpMaterial: Cast Iron and Steel Color: As shown in the picture Size: Approx. 180x96x75mm / 7.09x3.78x2.95in Interface Outer diameter: Approx. 10.3mm / 0.41in Voltage: DC48V Current: 2.5A Power: 120W Flow Rate: 7.0L/MIN Working Pressure: 1.2mpa Application: Pumping flowing liquid, but also able to transport some difficult-to-flow media Weight: Approx.1183g/41.7oz 1 x Diaphragm Pump1. Please allow 1& 8209;2in error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.