DC6-24V 1000W BLDC 3 Phase DC Brushless Motor Driver Hallless DC Motor Drive Board Speed Controller Regulator _x000D_ _x000D_ _x000D_ _x000D_ Working voltage: 6-20V (limit 24V) _x000D_ Drive current: rated 30A plus air cooling 50A _x000D_ Maximum power: 1000W _x000D_ Overcurrent protection: Yes _x000D_ Locked-rotor protection: Yes (after locked-rotor, the current will automatically drop and run at intervals) _x000D_ _x000D_ Over-temperature protection: Yes (over-temperature power is halved) _x000D_ Maximum speed: 224000 RPM (2 pole motor), 74000 RPM (6 pole motor), 40000 RPM (12 pole motor), 35000 RPM (14 pole motor). _x000D_ Precautions: _x000D_ 1. Reverse connection of the positive and negative poles of the power supply on the motherboard will cause permanent damage to some of the chips on the board (large current will not work for a few seconds) _x000D_ 2. There is sampling over-current protection at the output of the motor during normal operation. Because the power and current of the module are very large, please do not artificially short-circuit the module when the module is not working normally. Once the short-circuit, the circuit may be burnt and the tube may burst, the first wiring test Please test with low current and low voltage. After ok, connect with high current and high voltage. Since it is a bare board module, please pay attention to the insulation of the wiring head. It is strictly forbidden to touch the board parts _x000D_ 3. Do not connect the motor that is obviously inconsistent with the drive module voltage, current, or power, to avoid inexplicable damage _x000D_ Model Number: Motor Driver Board _x000D_ color:As shown _x000D_ Material:Plastic + Metal _x000D_ _x000D_ Package Contents: _x000D_ 1 x DC 6-24V 1000W BLDC 3-Phase Brushless Motor Driver _x000D_ _x000D_ Only the above package content, other products are not included. _x000D_ Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_