①. Name: Electronic drain valve ②. Model: 507292 ③. Indicator lamp: LED indicating power on / off ④. Voltage range: +/-10% ⑤. Protection: IP65 ⑥. Insulation: H ⑦. Maximum working pressure: 1.6Mpa ⑧. Maximum temperature: 90 Celsius ⑨. Temperature: -40 Celsius to 60 Celsius ⑩. The largest current consumption: 4mA ⑪. Power supply voltage: 24-240V AC/DC 50/60Hz ⑫. Discharge time (ON): 0.5--10 seconds ⑬. Time interval (OFF): 0.5--45 minutes ⑭. Widely used in separators, dryers, gas tank, drip legs and other compressed air system components ⑮. Clean the compressed air system installation. ⑯. Note the direction when installing the valve: outlet do not use the hose not against the impact of air. ⑰. Power supply voltage should match the drain valve voltage: the must be connected to connector "1" when using DC. ⑱. When leaving the drain valve, the cable is connected; brown is fiery L, blue is N, yellow-green is safety ground wire GND. ⑲. Tighten the long screw on the terminal box to prevent water from burning. ⑳. Warning: When installing the electronic drain valve, ensure compressed air has been emptied (i.e., under pressure) and the power supply has been switched off. ㉑. Colour: Gold + black ㉒. Material: metal ㉓. Size: 5 mm ㉔. In / out port size: 1/2inch ㉕. Package Contents: 1 x Electronic drain valve ㉖. Only the above package content is included; other items are not included. ㉗. Note: Light and different displays may cause the color of the item in the image to differ slightly from the real thing. The measurement allowed error is +/- 1-3cm.