Product Description 1. Programming function settings: Press the SET key for 2 seconds, X corresponding LED flash (4Hz), and then press M1 or M2 bonds. , , mouth, R3, L3R2, L2, R1, L1), and then click the SET key to map the corresponding function to M1/2; for example: when entering the programming mode, press the M1 key and display the LED to R1 to R1 On the top, then press the SET key, then the LED on R1 becomes long and bright, and the M1 function is R1; when programming M2 is the same as the above class. 10 LEDs are used as a key function indicator, indicating the function of programming buttons, showing up to 2 LED lights. 2. Cancel function: Press the SET key for 5 seconds, programming indicates that the LED changes from flash to extinguisher, then the M1/2 function is cleared. At this time, the key has no programming function. 3. Programming button memory function: Insert the back key expansion into the handle. If M1/2 has no function, the LED1 slow (2Hz) will be extinguished after 3 seconds, and the LED1 flash after the SET key enters the programming mode; if M1/2 Remembering the previous programming function, the corresponding LED lights are long. Power off the programming function before the removal of memory; inserting the handle again still retains the previous programming function, and the factory defaults to no programming; 4. Turbo function settings: Press the function button and Turbo key at the same time, then the function key has the Turbo connection function; press the above combination key again to cancel the key Turbo function. If the Turbo function is set, after pressing the button, the corresponding LED flash (4Hz);