Fiber Fusion Splicer High Accuracy Machine Industrial Components FS‑60C AC100‑240VUK Plug Item Type: Fiber Fusion Splicer Applicable Fiber: SM (G.652 and G.657), MM (G.651), DS (G.653), NZDS (G.655) and custom fiber types Connection Loss: 0.02dB (SM), 0.01dB (MM), 0.04dB (DS/NZDS) Return Loss: Better than 60dB Typical Connection Time: 9 Seconds Typical Heating Time: 26 Seconds (heating time can be set, heating temperature can be adjusted) Fiber Alignment: Fine alignment, core alignment, cladding alignment Fiber Diameter: Cladding diameter 80~150μm, coating diameter 100~1000μm Cutting Length: Coating Layer Below 250μm: 8~16mm; Coating Layer 250~1000μm: 16mml Fiber Clamp: Multi-functional clamp, suitable for bare fiber, pigtail, jumper, and leather cable; the replacement clamp can be used for SC and other connectors for various FTTx fiber optic cables Magnification: 300 Times (X-axis or Y-axis) Heat Shrink Tubing: 60mm, 40mm and a series of miniature tubing Display: 5.0 inch TFT color LCD display. The content can be flipped for easy two-way operation External Interface: USB interface, convenient for data download and software update Splicing Mode: 17 Groups of use modes Heating Mode: 9 Groups of use modes Splice Loss Storage: 5000 latest splice results stored in the built-in memory Built-in Battery: Continuous welding and heating not less than 200 times Power Supply: Built-in lithium battery 11.8V power supply, 5800mAh, charging time ≤ 3.5 hours; External adapter, input AC100-240V50/60HZ, output DC13.5V/4.81A Power Saving Function: 15% Lithium battery power can be saved in a typical environment Working Environment: Temperature: -10~+50℃, Temperature: <95%RH (non-condensing), Working Altitude: 0~5000meter, Maximum Wind Speed: 15meter/s Body Size(LxWxH): Approx. 205 x 140 x 123mm / 8.1 x 5.5 x 4.8in Lighting: Convenient to place fiber at night Body Weight: 1434 g / 50.6 oz(approx.)(without battery), 1906 g / 67.2 oz(approx.)(with battery)When the fusion splicer encounters the following situations, please turn off the fusion splicer immediately and remove the adapter from the power input port of the fusion splicer, otherwise it may cause serious consequences such as the fusion splicer cannot work normally or cannot be repaired. 1. Liquid and foreign matter enter the inside of the fusion splicer; 2. The fusion splicer is subject to strong vibration and shock; 3. It is forbidden to repair wrongly after disassembling the fusion splicer;