Fireyouracing Motorcycle Performance Hydraulic Brake Clutch Master Cylinder Rod system Efficient Transfer Foot Pump AdustableMotor Vehicle Brake Servi

54,00 €
ΔΩΡΕΑΝ Αποστολή:

Fireyouracing Motorcycle Performance Hydraulic Brake Clutch Master Cylinder Rod system Efficient Transfer Foot Pump AdustableMotor Vehicle Brake Servi

  • Μάρκα: Unbranded
Πωλήθηκε από:

Fireyouracing Motorcycle Performance Hydraulic Brake Clutch Master Cylinder Rod system Efficient Transfer Foot Pump AdustableMotor Vehicle Brake Servi

  • Μάρκα: Unbranded

54,00 €

Αποθήκευση 15,00 € (21%)

Συνιστώμενη τιμή

69,00 €
Σε απόθεμα
ΔΩΡΕΑΝ Αποστολή:
Πωλήθηκε από:

54,00 €

Αποθήκευση 15,00 € (21%)

Συνιστώμενη τιμή

69,00 €
Σε απόθεμα
ΔΩΡΕΑΝ Αποστολή:

Δεχόμαστε τους ακόλουθους τρόπους πληρωμής

Περιγραφή

Motor Vehicle Brake Service Kits Material: Alumimun with CNC processing Piston: Diameter 14mm. length 23mm Package: 1 pcs * Pump ; 1 set * extra extension parts; 1 set * M12 Banjo Bolts Working Length: It will have 3 working length as like below list: 1. When the piston is fully pushed to the right. The measured size of the product is about 130mm. 2. When the piston is fully pushed to the left. The measured size of the product is about 153mm. 3. When the piston is fully pushed to the left and the extension rod is added. The measured size of the product is about 180mm. Note before your using it: Pump under the head of the anchor head is silking, can a wide range of length ofthe distance, adjust position according to the model, using thread tighten glue,prevent loose change position. Some vehicles anchor head is U plate (Suzukiking GS125 machine, for example), as long as take U plate, installs to the pumphead end Fixed long screw pump under as m10x1.25 standard, and the adjustable range is long,suitable for most models modified line of clutch and brake line, but some models(such as Suzuki king GS125 machine) of the original car pull head fixed positionis silking, need to use 8.2 mm drill bit, removing silking to install Installation method 1 First will fill the brake oil pump under lie flat, do not have air, silk mouth is verybig, can be seen there was a bubble 2 See above screw, tubing with good twist screws, do not tighten, request screwside holes can be exposed 3 This is the key, be sure to look good. Link on the pump and tubing, and highup, the oil pump oil cup, and then pressure several times at random (10) handle,OK now just waiting for (dont allow any action) 5-10 minutes later, in the aboveside didnt tighten the screw hole will see the brake oil flow out, then lock screw,exhaust 4 Hydraulic clutch exhaust complete inspection methods: push the pump underthe wire to the pump body en croute, hand pinch on the pump handle, handle tipto move about 3 cm, knead not bottom go to, is correct. (press the handle untilthe pressure not bottom go to, there are about 3 cm distance handlebar, itfinished the exhaust, but loading debugging), loading, must pull wire all out, againunder the fixed pump, (make sure to loosen the clutch handle, wire all stretchedout) Please note that you may find oil at product or package when you open the package as like below photo. The reason is that, before each product
  • Fruugo ID: 287016611-640423316
  • EAN: 8935485480202

Πληροφορίες για την ασφάλεια του προϊόντος

Δείτε τις πληροφορίες για την ασφάλεια του προϊόντος που περιγράφονται παρακάτω

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Ετικέτες ασφάλειας προϊόντων

CE Mark
Προειδοποιήσεις για την ασφάλεια: IMPORTANT SAFETY INSTRUCTIONS READ BEFORE USE: Read all instructions and safety warnings before using this product. Failure to follow these guidelines could result in injury, damage, or malfunction. GENERAL WARNINGS INTENDED USE: Use this product only for its intended use as described in the user manual. SUPERVISION REQUIRED: This product is not intended for unsupervised use by children or persons with reduced physical, sensory or mental capabilities. INSPECT BEFORE USE: Inspect before use for any signs of damage or wear. Do not use if damaged.

Παράδοση & Επιστροφές

Αποστέλλεται σε 24 ώρες

  • STANDARD: ΔΩΡΕΑΝ - Παράδοση μεταξύ Πέμ 06 Νοεμβρίου 2025–Παρ 14 Νοεμβρίου 2025 - ΔΩΡΕΑΝ

Αποστέλλεται από Κίνα.

Κάνουμε ό,τι καλύτερο μπορούμε για να εξασφαλίσουμε ότι τα προϊόντα που παραγγέλνετε αποστέλλονται σε εσάς πλήρως και σύμφωνα με τις προδιαγραφές σας. Παρ' όλα αυτά, αν παραλάβετε μία ελλιπή παραγγελία ή προϊόντα διαφορετικά από αυτά που παραγγείλατε ή αν υπάρχει κάποιος άλλος λόγος που δεν είστε ικανοποιημένοι με την παραγγελία, μπορείτε να την επιστρέψετε ολόκληρη ή κάποια προϊόντα από αυτή και να λάβετε πλήρη επιστροφή χρημάτων για τα προϊόντα. Προβολή πλήρους πολιτικής επιστροφών

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Κατασκευαστής:
Οι παρακάτω πληροφορίες αφορούν τα στοιχεία επικοινωνίας του κατασκευαστή του σχετικού προϊόντος που πωλείται στο Fruugo.

  • Shenzhen Shi Maisi Keji Youxian Gongsi
  • Shenzhen Shi Maisi Keji Youxian Gongsi
  • No. 16, Nanling West Road, Nanwan Street, Longgang District
  • SHENZHEN
  • CN
  • 518048
  • simongege66@outlook.com
  • 13250331717

Υπεύθυνος στην ΕΕ:
Οι παρακάτω πληροφορίες αφορούν τα στοιχεία επικοινωνίας του επευθύνου στην Ε.Ε. Ο υπεύθυνος είναι ο καθορισμένος οικονομικός φορέας που εδρεύει στην Ε.Ε. και είναι υπεύθυνος για τις υποχρεώσεις συμμόρφωσης που αφορούν το σχετικό προϊόν που πωλείται στην Ευρωπαϊκή Ένωση.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • Calle Gran Via 49, 7 Dch.
  • Madrid
  • ES
  • 28013
  • ecrepservice@hotmail.com
  • 682797075