Target Pet : Cat Brand Name : pledge agro Origin : Mainland China Blind intubation for cats and rabbits/veterinary tracheal intubation Specification: Cat: C1for 1-2.0kg C2 (for 1.5-3.5kg/3-8lb) C3 (for 3-5kg / 6.5-11lb) Rabbit: R2 (for 1-2kg/ 2-4.5lb) R3 (for 1.8-3.5kg/ 4-8lb) This table is intended to bea guide only. The right size cannula should be determined by the ideal body weight of the patient. Steps for usage: 1. Choose the correct size for the rabbit or cat according to the 2. Ensure that the patient is pre-oxygenated and then fully anaesthetised to a surgical plane of anaesthesia (jawrelaxed, reflexes absent). lt may be appropriate to apply an appropriate dose of topical local anaesthetic to the larynx, depending on the clinician's assessment. 3. Withdraw the tongue and/or use a laryngoscope/otoscope to examine the mouth and pharynx of the patient. Remove any foreign materials and suction any excessive secretions that are seen. 4.Lubricate the cannula with Vetlube or similar water-based lubricant. Shake the bottle well and ensure all outer surfaces of the cannula bowl are covered with lubricant, without obstructing the airway channel. 5.Holding the patient's tongue, insert the cannula by advancing gently along the hard palate with the open airway channel facing ventrally, towards the tongue. 6. Gently advance the cannula into the pharynx. The cannula will be felt dropping into position. 7.The cannula should fit snugly in place with no rotational ability. Confirmation of correct placement should be determined by testing for a patent airway (for example, with a capnograph, gentle positive pressure ventilation or a respiration monitor). 8.The cannula should be secured into place by tying a gauze fabric strip onto the ring features around the device or the connector itself and around the back of the patient's head, thus allowing no rostral movement of the cannula. The cannula should be disconnected from the circuit whilst the patient is being repositioned or rotated. 9. Once the cannula is secure, the weight of the anaesthetic circuit should be supported. 10.Once the proc window.adminAccountId=254410898;