HABOTEST Multi-Function Network Cable Finder Tester 1. Signal transmission format: multi-frequency pulse signal 2. Output level: 8Vp-P 3. Connector type: RJ11, RJ45 4. Compatible network cables: CAT5, CAT6 5. Network cable compression detection speed: 1 second 6. Signal transmission distance: 3 kg 7. Input voltage protection: 60 V 8. Network cable detector: dupports detecting shielded and unshielded network cables on switches, routers, and other devices operating at voltages less than 60 V or without power. 9. Auto-power off: automatically shuts off after 30 minutes. 10. Power supply: 9V 6F22 Battery (Not Included) 11. After cable tracing is complete, a cable connection diagram is created to verify line connectivity and identify shorts, opens, and misconnected pairs, accelerating troubleshooting. 12. Primarily used to quickly detect through-hole faults, locate fault points, and mark lines. It can also be used to quickly determine if optical fiber is broken, excessively bent, or poorly connected. 13. Searchable 48-core network cables, coaxial cables, telephone cables, and shieldedunshielded network cables. 14. Quickly troubleshoot and locate breaks, shorts, or damage in the cable. Hold the receiver probe close to the cable. If you hear a "clicking" sound, this is normal. Move the probe along the cable. 15. If the sound stops, the line is broken. 16. Supports 60V operation. Detects whether an Ethernet cable (e.g., Cat5eCat6) is providing power to a PoE-powered device (e.g., IP camera, wireless access point). 17. Weight: Sensor 82g Receiver 85g 18. Dimensions: Sensor 125x60x32mm Receiver 190x47x30mm