3D Printer Engraver 2 in 1 Carving Machine 305x305x400mm Build Volume with Lattice Glass Platform Fast Heating Bed 4.3 Inch Touchscreen Ultra-Silent Driver Auto Leveling Specification: Model: Hydra 2-in-1 3D Printer Product Size: 56 x 60 x 62cm/22.05 x 23.62 x 24.41in Product Weight: 16kg/35.27lb Build volume: 305 x 305 x 400 mm/11.8 x 11.8x 15.75 in Layer resolution: 0.1mm -0.3mm Build speed: 30mm/s - 150mm/s Travel speed: 250mm/s Print surface: Removable -ceramic (magnetic PEI flex plate as upgrade) Heat bed type: AC heat bed (SSR + 135C Fuze) Number of extruders: 1 Filament diameter: 1.75mm Supported materials: PLA, PLA FLEX, PLA WOOD, ABS, PETG, HIPS, ASA, PA, PC, TPU Special features: Modular X-Carriage, ABL, touchscreen, synced dual-z, direct drive, silent drivers Advanced sensors: filament detection sensor, sensorless homing Calibration: Auto bed leveling BILINEAR 25 points, 3.3 Print technology: FFF (Fused Filament Fabrication) Feeder type: DIRECT DRIVE DUAL DRIVE extruder + V6 VOLCANO HOTEND Maximum Z axis resolution: 0.05mm Nozzle type: MK8 VOLCANO Nozzle diameter: 0.4mm Nozzle temperature: 150℃ -240℃ (all metal throat - no bore 4.1mm + temp. sensor semitec 104GT) Nozzle heat up time: <2 minutes Build plate heat up time: 120℃ in less than 2 minutes Operating sound: < 50dBA Control board: 32bit MKS sGen L V2.0 / TMC 2209 V2.0 UART MODE 2.0.7.2 / 4.2 Inch touchsceen Upgradability: In-house made X-carriage modular system: LASER, CNC, DUAL EXTRUDER, open-source software, removable drivers, and more to come... Engraving Size: 305x305mm Machine Electricity Power: 2.5W/3OW Diode Laser Power: 1.6W/5.5W Laser Wave Length: 455±5nm Engraving Accuracy: 0.01mm Focusing Method: Fixed + sliding device Power output: 24V 240W Engraving Materials: Wood, paper, cardboard, plastic, white, PCB board, aluminum oxide, 304 Stainless steel, ceramic, dark stone Package Size: 653 x 520 x 280mm/25.7 x 20.4 x 11in Package Weight: 17kg/37.47lb