[10Gbps M.2 NVMe SSD Enclosure] This M.2 SSD Enclosure provides transfer speeds of up to 10Gbps as an NVMe enclosure. NVMe SSD Test: Got 1009MB/s Read & 928MB/s Write speed with 750 on an M1 Powerbook Pro. Support UASP, A.R.T and TRIM. [Under Safe Temp after 24 Hours of Full Workload] The M.2 NVMe Enclosure adopts the optimized "sandwich" design: Thermal Silicone pad pasted on your ssd to absorb the waste heat - Aluminum Heatsink covered the ssd and thermal pad(increase the heat dissipation area) - Install them into the premium aluminum enclosure. The optimized structure will cool your M.2 SSD to a safe temp to avoid overheating and lower speed, improving the performance of your ssd. [2TB Supported, Windows & for & Linux] The usb c supports 2230/42/60/80 NVMe M-Key & B+M Key SSD Up to 2TB. Thunderbolt3-compatible, backwards compatible with USB3.1, USB3.0. Support for , Windows and Linux system. Plug and play, no extra power needed. You can monitor the working status of your SSD by the LED indicator light whenever. [Read/write protection] Read/write protection need to press 5 times and then power off, that is, unplug the USB cable, and then re-connect the USB cable to start the Read/write Protection. Colour:Gray Material:Aluminum alloy Size:40x40x10mm Package Contents: 1 * SSD Enclosure 1 * cable 1 * USB A to USB C cable 1 * screwdriver 1 * thermal grease Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.