Name: Folding Water Deck Chair Floating RowMaterial: High Quality Environmental Protection PvcThickness: 0.25mm PlasticStandard: National Standard Gb-6675 American Astm F-963 European Union En-71Load: 200kgWeight: Single Weight 0.3 Kg. This Product Is Not Equipped With Inflatable Tools{Inflatable Products Have The Following Precautions In Daily Use}1. Do Not Approach Sharp Objects, Such As Thorny Plants Or Sharp Stones And Blades.2. When Using, Add A Base Cloth Under The Inflatable Product To Prevent It From Being Punctured By Debris.3. Do Not Use It As A Life-Saving Float.4. Keep Away From Flame Or High Temperature Items.5. When The Temperature Is High, Do Not Put The Inflatable Product With The Valve Closed And Inflated In The Car Or Tent.6. Do Not Stick With Sunscreen Or Alkaline Drugs.7. Please Keep It Out Of Reach Of Pets.8. The Valve Part Is Hard And Should Be Avoided When Resting.9. Do Not Expose To The Sun For A Long Time, The Ultraviolet Rays Will Slowly Damage The Material On The Surface. {How To Repair An Inflatable Product}A. Repair Needle Eye:If Your Inflatable Product Is Accidentally Punctured By A Needle Or Wood Thorn In One Or More Small Needle Holes, It Is Easiest To Repair:1. Cover The Gas Nozzle After Deflating The Product To Reduce The Gas Flow In The Bed 2. Take Out The Glue In The Repair Kit, And Drop A Drop Of Glue At The Eye Of The Needle 3. If The Eye Of The Needle Is Large, Take A Toothpick, Dispense Glue With The Tip Of The Toothpick, Apply It Into The Broken Eye Of The Needle, And Then Fill The Eye Of The Needle With Glue 4. After The Repair Is Completed, Wait For Four Hours Before Inflating.B. Repair The Scratched Or Scalded MouthIf Your Product Is Accidentally Cut By A Knife Or A Big Hole Is Burned By Fire, Please Don'T Panic, It Can Be Repaired In The Following Order:1. Cover The Gas Nozzle After Deflating The Product To Reduce The Gas Flow In The Bed 2. Find The Patch Material In The Repair Bag And Cut A Piece, Which Should Be Enough To Cover The Broken Seam 3. Apply Glue To The Damage, Press The Patch, And Glue The Side Seam Of The Patch 4. Apply Pressure To Ensure That There Are No Gaps On The Glue Surface, And Press It Firmly With A Smooth And Heavy Object 5. Wait Eight Hours Before Inflating, And The Repair Is Complete.C, Suede Repair1. Carefully Clean The Repaired Area 2. After Drying, Take Out The Patch And Cut It Well, Cover It On The Damaged Surface, And Allow A Little More Around It 3. Apply A Layer Of Glue To The Patch And Damaged Surface, And Glue The Edge Seam Of The Patch To Ensure A Complete Seal 4. Press It Firmly With A Smooth And Heavy Object 5. Press Down With A Heavy Object, And Then Inflate After 24 Hours, And The Repair Is Completed.D. Other Matters:1. Remember Not To Inflate Too Much (Especially In Summer), And Do Not Exercise Too Vigorously On The Product, Otherwise The Pull Strap In The Product Will Be Overloaded And Broken, Causing The Product To Bulge And Cannot Be Repaired, And Can Only Be Scrapped.2. The Repair Glue Is A Chemical Substance, Do Not Touch The Eyes Or Swallow It.