Item Type: Remote Control <br>Material: ABS <br>Colour: White <br>Model: KB-4000A <br>Frequency: 433MHz <br>Modulation: Used for ASK (Amplitude Modulation) <br>Clone Chip Type: For 2260 (PT2260, SC2260, LX2260, HX2260), 2262 (PT2262, SC2262, LX2262, HS2262, HX2262), PT2264, PT2240 (LX2240), 1527 (EV1527, HS1527, HX1527), FP511AX, 66 SMC2527, AX265 AX365SMC2040, 6527, 665SMC2527, 665SMC205 HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F629, PIC16F630, Etc. (Different Chip Manufacturers Have Different Chip Model Prefixes, As Long As the Digital Part of the Chip is the Same Model) <br>Wireless Transmission Range: 500-1000m (Open Area) <br>Battery Type: 1 x 9V/6F22 Battery (Not Included) <br>Scope of Application: Garage Doors, Motorcycles, Car Alarm Products, Home Security Products, Short-distance Wireless Remote Control Products, Industrial Control Products, Etc.1、It is made of high quality ABS material, durable, long service life, compact in appearance and easy to carry. <br>2、It has strong learning and duplication, personalized and easy?to?use, simple design, and convenient to use. <br>3、It copies data faster and is not easy to lose codes. The universal type is suitable for most common brands. <br>4、It is widely used in garage doors, motorcycles, car alarm products, home security products, industrial control products, etc. <br>5、It saves a lot of time, copy any fixed code remote control, save the trouble of replacing the designated remote control.1. Select the remote control conditions: the original remote control function is normal, the remote control chip is the same or compatible, and the remote control frequency is the same. <br>2. The remote control can only copy the fixed code, learning code chip and part of the single chip remote control (the chip model can be copied, see Copyable chip type). <br>3. Two way remote control, rolling code remote control, and single?chip encryption program remote control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301, etc. <br>4. Before copying the remote control, please make sure that the existing code on the remote control has been cleared, and check whether the code has been cleared successfully. Otherwise, it cannot be copied. <br>5. Make sure your remote control has enough power, the farther the distance between the two remote controls, the better! If the copy distance is too close, switch to different angles to copy. Press and hold the button on the original remote control to send the signal completely normal, and then press the button on the remote control, the function is completely duplicated.1 x&nbsp;Remote Control