Wooden Floor Installation Tool KitThe complete floor installation tool kit contains all the essential items you need: 1 x heavy-duty pull-up bar, 1 x vinyl rubber tapping block, 1 x double-sided hammer, 1 x protective foam pads and 60 x corner spacers, making your installation more convenient and easier. < p>Solid Rubber Hammer There are two different types of heads (hard plastic and soft rubber). This hammer provides a gentle, positive blow without scratching or damaging the surface of your board, and ensures that any work you do is done with extreme care and precision. Pull Bar and Block Improved HittingExtra thick high strength steel pull bar designed with 3'' wide front edge and felt pads on the back help avoid damaging and scratching your board during setup. The premium vinyl rubber tapping block can handle a very intense flooring installation task. 60pcs SpacersAll of these spacers are easy to install flooring over a large area of flooring. The groove angle design prevents slipping between tiles on the floor or wall and is easy to remove. Wide Use This Laminate Flooring Installation Kit is suitable for laminate flooring or hardwood from 0.27 inch (7 mm) to 0.6 inch (15 mm). It can be applied to most laminate, vinyl or parquet floors currently on the market. Step 1 Spacers are used between the wall and floor to allow for expansion natural wood products. The spacers have "toothed" edges that lock them in place once a board is placed on them. Step 2 Start by placing the long edge of the tapping block on floor. Using a hammer, gently tap the other long edge of the tapping block to firmly compress the flooring. It can be used with glued and glueless floating laminate or hardwood flooring systems. Step 3 Lay the short end of the tie rod down so that it so that the lip hangs over the end of the floor panel. With the top end facing up, use a hammer and gently tap the top section to assemble the flooring. Strong Rubber Hammer High Strength Fiberglass Hammer with non-slip rubber handle to absorb vibrations. The double-sided solid rubber head provides a smooth, positive strike and the mallet head measures 35mm in diameter.