Wooden Flooring Installation Tool KitComplete floor installation tool kit contains all the essentials you need: 1 x heavy duty pull up bar, 1 x wooden knocking block vinyl rubber, 1 x double-sided hammer, 60 x corner spacers, making your installation more convenient and easier. Solid Rubber Hammer There are two different types of heads (hard plastic and soft rubber ). This hammer provides a soft, positive blow without scratching or damaging the surface of your board, and ensures that any work you do is done with extreme care and precision. Draw Bar and Block Upgraded HitsExtra thick high tensile steel pull up bar designed with 3'' wide front edge and rear felt pads help prevent damage and scratches to your board during setup. The premium vinyl rubber knocking block can withstand a heavy duty flooring installation task. 60pcs SpacersAll of these spacers are easy to install the flooring over a large floor area. The groove angle design prevents slipping between tiles on the floor or wall and is easy to remove. Wide UsageThis Laminate Flooring Installation Kit is suitable for laminate floors or hardwood from 0.27 inch (7 mm) to 0.6 inch (15 mm). It can be applied over most laminate, vinyl or parquet floors currently on the market. Product Description Step 1 Spacers are used between the wall and the floor to allow the natural expansion of the wood products. Spacers have "toothed" edges that lock them in place once a board is placed on them. Step 2 Start by placing the long edge of the punching block on floor. Using a hammer, gently tap the other long edge of the tapping block to firmly compress the flooring. It can be used with both glued and glueless floating laminate or hardwood flooring systems. Step 3 Lay the short end of the tie down so that so that the lip hangs over the end of the floor panel. With the top end up, use a hammer and gently tap the top section to assemble the flooring. Premium Knocking Block The knocking block in premium vinyl rubber can handle high intensity installation work. Suitable for 0.27" (7mm) to 0.6" (15mm) laminate or hardwood floors.