Feature:1. [Real Time Measurement] Glossmeter can measure in real time, put and measure without key operation, adopts ergonomic design, with exquisite appearance and comfortable grip.2. [Ambient Temperature Compensation] With ambient temperature compensation function, stable value, long period calibration is allowed, QC judgment function, fast detection.3. [USB Transmissio] Metal glossometer support USB transmission, can be connected to the computer to operate and complete the test report.4. [Multifunctional] Gloss meter can measure 20, 60, 85 gloss values at the same time, and can switch to single angle, double angle, and three angle measurement.5. [Widely Application] Widely used in paints, coatings, inks, plastics, paper, tiles, ceramics, stone, metals and electroplating layers, etc.Specification:Item Type: Gloss MeterModel: LS197Material: ABSBattery: 1 x rechargeable lithium battery 3.7V 2000mAh (Battery Included)Application: Sampling and comparison of gloss measurementWeight: Approx. 517g / 18.2ozMeasuring Angle: 20, 60, 85Measuring Spot:20: 9mm x 9mm60: 9mm x 15mm85: 5mm x 38mmMinimum Size of Test Object: 57mm x 10mmMeasuring Range:20: 0-2000GU60: 0-1000GU85: 0-160GUResolution: 0.1GURepeatability:0-100GU: 0.2GU100-1000GU: 0.2% of readingReproducibility:0-100GU: 0.5GU100-1000GU: 0.5% of readingZero Error: 0.1GUIndication Error:0-100GU: 1.5GU100-1000GU: 1.5% of readingDisplay: 240 x 128 dot matrix LCDSystem Language: Simplified Chinese, EnglishCharging Interface: USB (Type-C)Data Interface: USBOperating Temperature Range: 10~45, 0~85%RH (non-condensing)Storage Temperature Range: -10~60, 0~85%RH (non-condensing)Angle Measurement: Single angle, double angle, three angleQC Judgment Function Ambient Temperature Compensation How To Use:1. Power on/offPower on: In the off state, short press the instrument button to power on.Shutdown: Press and hold the button of the instrument to shut down; the instrument will automatically shut down when there is no operation for more than 3 minutes.2. Parameter settingIn the shutdown state, long press the instrument button for 3S to enter the parameter setting mode:A. Language Short press the button to select Chinese or English, long press the button for 3S to complete the setting, and enter the following setting item.B. Mode selectionShort press the button to select normal mode or QC mode, long press the button for 3S to complete the setting, and enter the following setting item.C. Angle selectionShort press the button to select the measurement angle, you can select single angle 20, 60, 85, double angle 2060, 2085, 6085 or three angle 206085 measurement, long press button for 3S After the setting is completed, exit the setting and enter the calibration interface.3. Equipment calibrationPut the instrument on the standard board and turn on the opportunity to enter the calibration interface. The user can perform the calibration operation according to the calibration prompt, and the measurement interface will be entered after the calibration is passed. If the instrument is turned on without putting it on the standard board, it will skip the calibration and enter the measurement interface directly.If it prompts that the calibration failed, the possible reasons are as follows:The standard board is dirty, please wipe the standard board clean with a special lens cloth, and then buckle the host into the base.The host is not close to the standard board, please buckle it into the base again.