M410T Ethernet Remote IO IOT Module TCP Data Acquisition Module Collector for Industrial Security Monitor Measurement Control Systems Item Type: Ethernet Remote IO IOT ModuleMaterial: MetalInterface: Ethernet portx1, RS485x1, DINx16 Power Output: DCx1 Analog: 4-20mA Power Input Voltage: Does not support AO output: 9~36VDC, Support AO output: 24~36VDC Power Consumption: Typical standby power consumption: ≤ 2W Power Output Channel Output Current: 1500mA at 12V (maximum) Power Protection: Anti reverse polarity, ESD air: 15KV, surge: 4KV Ethernet Network Port Specifications: 1 x RJ45, 10M/100Mbps Network Port Protection: ESD contact: 8KV, surge: 4KV (10/1000us) Protocols: for Modbus RTU, for Modbus TCP, MQTT Serial PortNumber of Serial Oorts: 1 x RS485 Serial Port Baud Rate: 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 128000 Data Bits: 7, 8 Check Digit: None, even, odd Stop Bits: 0.5, 1, 1.5, 2 Protocol: for Modbus RTU (slave), for Modbus RTU (master) Serial Port Protection: ESD contact: 8KV Surge: 4KV (8/20us) Digital Input Quantity: 16 channels Input Type: Wet contact (dry contact not supported), wet contact supports both NPN type sensors and PNP type sensors Wet Contact: Closed: 10-30VDC, disconnected: 0-3VDC Support DIN2-DIN12 as a low speed pulse counter: the anti shake time can be set 1~2000ms, the default is 1ms, and the corresponding pulse frequency is up to 1KHz. Isolation protection: 2KVrms Sample Rate: 100Hz Applications: Intelligent agricultural temperature and humidity data collection and monitoring; Intelligent breeding temperature and humidity data collection and monitoring; Temperature and humidity data collection and monitoring in warehousing and libraries; Data collection and monitoring of meteorological station information; Temperature monitoring of cold storage, fruit and vegetable storage room, industrial computer room, substation cabinet, etc.; Other occasions where monitoring points are scattered; Data transmission of solar monitoring system, data collection and transmission of charging pile; Data transmission of ATM, POS, meter, PLC, DAQ and other equipment; Smart grid data acquisition and control; Intelligent traffic data acquisition and control; Industrial automation data acquisition and control; Environmental protection data acquisition and control