Features: Brand new and high quality 2oz copper 4-layer PCB, ensures high current capacity. Dual Synchronous Step-Down BEC, 5V output 3A, 12V output 2A (max 3A) Power arranged in pairs, easy to connect. Voltage selection for camera and video transmitter, set signal line. BEC inputs are TVS protected against interference from high-voltage DC ignition when the battery is low. Specifications: - Input voltage range (3S-6S operation): 9 - 26VDC - Regulated 5V and 12V outputs - LED power indicator (5V & 12V outputs) - 4 ESC outputs ESC outputs: - Continuous current: 20A per output - Peak current (10 seconds/minute): 25A per output BEC 5V output: - Designed for RC receivers, flight controllers, OSD and servos. - DC/DC synchronous buck regulator, efficiency up to 95%. - Voltage: 5.0 +/- 0.1VDC - Continuous current: 3 amperes - Short circuit tolerant (10 seconds/minute) - LED (indicates voltage is regulated) BEC 12V output: - Battery should be 4S~6S LiPo - Standard output designed for powering cameras and video transmitters, etc. - Voltage: 12.0 +/- 0.2VDC - Continuous current: 2 amperes (max. 3A 10s/minut) - Short circuit tolerant (10 seconds/minute) - LED (indicates voltage is regulated) CAM & VTX voltage regulator - 3S operation. Select "VCC" for 12V camera & 12V VTX, VCC=Battery voltage. - 4~6S operation, select "12" for 12V camera & 12V VTX - 3~6S operation, select "5" for 5V camera - Video passes from "CAM" button to "VTX" button Physical: - Dimensions: 36 x 36 mm - Weight: 6g - Mounting holes with 30.5 mm square spacing Note: Allow 0-1 cm error due to manual measurement. Please ensure you have no objections before placing a bid. Due to differences between screens, the color may not reflect the actual color of the product. Thank! Packaging includes: 1 x Power Distribution Board