85x85x14mm Eid Mubarak Silicone Mold Building Cake Decoration Fondant Mold DIY Party Chocolate Baking Supplies Kitchen Tools|Cake Molds85x85x14mm Eid Mubarak Silicone Mold Building Cake Decoration Fondant Mold DIY Party Chocolate Baking Supplies Kitchen Tools?Name: Eid al-Fitr decorated fondant mouldMaterial: food grade silica gelSize: 85*85*14mmQuality:Comply with US FDA quality, non-toxic and environmentally friendly, temperature resistance -40 to +230Usage:Cake, pizza, bread, mousse, jelly, prepared food, chocolate, pudding, fruit pies and other foods.Scope of application:Microwave, oven, refrigerator, etc.?Product attention:silicone products are packaged after they are newly made, so when they are newly used, they will generally have a smell. Please rest assured, this is a normal phenomenon. As long as it is washed and dried, the smell will gradually fade.Scope of applicationOven, refrigerator, microwave, etc.Features: This product has a heat-resistant temperature of -40C to 230C, can be used repeatedly, has a novel shape, and has a variety of styles. It breaks the difficult situation of traditional cake molds. It is very easy to demold and easy to clean. The silicone mold may have a slight smell of silicone at first, but it will be gone after a few washes. The food made will not be scented. Please feel free to use it (buyers who mind, please think twice before buying). Or you can add some water and bake it in the mold before using it, but be careful not to bake it empty.Precautions1. After each use, it should be cleaned with hot water (diluted edible detergent) or placed in the dishwasher. Do not use abrasive detergents or foam for cleaning. Make sure that the silicone mold is completely dry before each use and storage.2. When baking, the silicone mold should be placed flat on the baking tray separately. Do not dry-bake the molds. For example, for a 6 continuous mold, if only 3 molds are used, the other 3 molds must also be filled with clean water. Otherwise, the mold will be burned out, which will reduce the service life. To ensure that the finished product achieves the best baking effect, lightly spray a small amount of anti-stick baking oil on the surface of the silicone cup before baking.3. When the baking is complete, please remove the entire baking pan from the oven, and place the baked products on the grid to be cooled until they are completely cooled4. Silicone molds can only be used in ovens, ovens, and microwave ovens, and it is strictly forbidden to use them directly on gas or open flames5. Do not use knives or other sharp tools on the silicone mold, and avoid heavy pressure or pulling6. Due to static electricity, the silicone mold is easy to stain, if it is not used for a long time, it is best to put it in a carton without direct sunlight7. Do not rinse with cold water immediately after leaving the oven to prolong the service lifeSilica gel is by no means plastic. It is made of 100% pure silica gel. Therefore, after using it for a period of time or after operating in the oven, it will slightly yellow, not aging, but a unique phenomenon of pure silica gel and does not affect use. There will be creases after the heavy object is pressed for a long time, and the pressure can gradually recover naturally without affecting the use. Since pure silica gel has a good insulating effect, there will be electrostatic adsorption of small particles in dry weather, which can be easily cleaned off with water. It can be used repeatedly.It is recommended that after receiving the mold and before making the cake, you should fill the mold with water, turn it in the microwave or oven for 1-2 minutes, then pour out the water and remove the flavor from the mold, so that it will lose its flavor after using it twice.hintThe best way to make a cake is to pour the cake batter about 7 minutes full, because the cake mold will swell. Do not roast empty, do not close to open flames, avoid cutting sharp objects