Brand: Motospeed (Darmoshark) Product model:N3 Optoelectronic IC:PAM3395 Lithium battery:300mAh Maximum speed:650IPS FPS image proceing:26000fp Acceleration50G SPI: 8ms/2msdefault/1m Mouse foot:Teflon PTFE (black/white/gray) Most of them are white mouse foot Interface: Gold-plated USB2.0 Type-C Connection mode: wirele/Bluetooth/wired DPI:400 red, 800 blue (default), 1600 green, 3200 purple, 4800 yellow DPI:26000DPIDrive settings Wired/2.4GHz: red light 125HZ, blue light 500HZ,green light 1000HZ Size:123.50*66*40mm Net weight 59 5G Driver installation: only Windows system is supported Drive installation: :// darmoshark.cn/ Bluetooth pairing operation operating system Wired and 2.4G modes: WinXP/Win7/Win8/Win10/Win11/Maco Bluetooth mode: Win8/Win10/Win11/Maco Bluetooth pairing operation When the bottom three section switch is turned to the B icon, pre the left, middle and right buttons at the same time, and the blue light of the scroll wheel position flashes, entering the pairing state. At this time, you need to turn on the Bluetooth device to search for the N3 Mouse before pairing. After the connection is succeful, the indicator light goes out. 2.4G pairing operation: When the bottom three section switch is turned to the G icon, pre the left, middle and right buttons at the same time, and the green light of the scroll wheel position flashes to enter the pairing state. At this time, the receiver needs to be inserted. After the connection is succeful, the indicator light goes out. (Note: The factory has been paired and it is OK. If the 2.4G has no function, this step can be followed Wired mode: When inserting Type-c data cable connection, the wired mode is preferred.