Welcome to the store! 1. IP65 protection, the product can work normally under the sea, salt and alkali environment, and tough weather conditions. 2. The interior is equipped with lightning protection components (MOV), which can protect the lights from the impact of thunderstorms and extend the life of the lights. 3. Energy saving, long life, safe and reliable, overload current protection self-resetting fuse, commonly used in places where visibility is low and hopes to automatically turn on the light. 4. This photoelectric switch can automatically control the lighting time according to the environmental lighting value, which is more convenient to use, suitable for street lighting, courtyard lighting, and the like. 5. The automatic detection circuit for lighting of the internal environment is provided. When the environmental flow sensitivity changes to a value, it automatically turns off during the day and automatically turns on at night. Item Type: Photoelectric Switch Material: PC Rated voltage: 120V-277VAC Voltage range: 80V-305VAC Rated frequency: 50 / 60Hz Specified load: 1000W for Tungsten, 1800VA for ballast Power consumption: 120V/0.42W 220V/0.8W On/Off: 1(FC)/ON 4(FC)/OFF Anti-interference delay: 20s High power factor, power factor: PF1.0 277VAC ≥ 0.96 Insulation strength: 3000VAC 1mA 1s Dustproof and waterproof: IP65 (meets GB4208-2008 IEC60529:2013 standard requirements) Surge immunity (MOV): 420J/6KV (meets IEC61000-4-5:2005 standard requirements) EMI interference voltage: Meets FCC Part 15 Class B QP peak and for AV average standard requirements Use environment: Outdoor, minus -25℃ to +75℃ Overload current protection: Self-resetting fuse Relative humidity: 99%RH Failure mode: Failure-ON Product size: Approx. 8.2 x 6 cm / 3.2 x 2.4 inches Weight: Approx. 123 g / 4.3 oz 1 x Photoelectric Switch