1、Double Sided Coating: The steel plate is double sided coating, one side is gold powder, the other side is smooth PEI, and has both smooth and powder sides. 1 steel plate can meet 2 printing requirements. 2、Basic Specifications: This size of steel plate is 235 x 235mm , which is suitable for construction boards of the same size. 3、Spring Steel: Made of high quality spring steel, will not kink or warp when you bend slightly, easy to adhere to the printed surface and easy to remove the printed matter. 4、Easy to Use: This double sided coated bed sheet is very easy to use, just put on your heating bed, and both sides can be used directly. 5、Prints: When the temperature of the heating bed reaches room temperature, the prints will easily fall off the surface. If the print is still jammed, bending the plate slightly will help remove. 1 x Steel Plate1 x Magnetic B Side Item Type: PEI Flexible PlateMaterial: SteelColour: BlackSize: Approx. 235 x 235mm / 9.25 x 9.25inApplicable Machine: for Voron 350 V2Print Reference Temperature 1.PLA: (Both sides are fine)Hot Bed: 50-60℃Sprinkler Head: 200-210℃Hot Bed 60℃, Nozzle 210℃ 2. ABS (Powder surface is recommended. After the temperature of the smooth surface exceeds 80℃, the surface is easy to foam)Hot Bed: 70-120℃Sprinkler Head: 240-250℃ 3. PETG: (Both sides are fine)Hot Bed: 60-85℃Sprinkler Head: 230-245℃ 4. Carbon Fiber (Both sides are fine, very close to PLA, hardened steel is recommended for the sprinkler head)Hot Bed: 50-60℃Sprinkler Head: 200-220℃ 5. TPU: (Both sides are fine)Hot Bed: 50-60℃Sprinkler Head: 200-220℃Hot Bed 60℃, Nozzle 220℃ 6. Wood (Both sides are fine, very close to PLA)Hot Bed: 50-60℃Sprinkler Head: 200-220°C