PEI MAGNETIC PAD FOR 3D PRINTING 280X280mm Function: 1. Good printing effect: Strong adhesion to the surface, no glue required, allows cold stamping, and the printing has no curled edges. The printed product has a matte effect at the bottom, which is exquisite and beautiful. 2. Printing temperature: When the temperature of the heating table is about 60, the adhesion will be excellent, and you can directly print on each side of the double-sided PEI board without using glue or other tools to help the model stick to the board. You don't have to worry about the print curling at 60 bed temperature. It can also print PETG well, but the temperature of the hatchery must be around 80-85. 3. Double-sided printing: PEI double-sided spraying, both sides can be printed, just put it on the heating table, remove the protective film, and print directly without glue. 4. Built-in 3-in-1 plate: premium PEI material design makes the printed parts stick to the printing surface easily, flexible and detachable. 5. Great Compatibility: Double sided PEI powder coated magnetic spring steel platform, suitable for End 7. Please make sure the printing size of your printer platform is compatible. Specification: Item Type: 3D Printer Mounting Plate Product Size: Approx. 280 x 280 mm / 11.02 x 11.02 inches Product use: for 3D printer. Product material: PEI spray powder, spring steel PEI spray thickness: approx. 0.25mm / 0.01 inch Thickness of the spring steel sheet: approx. 0.4mm / 0.02in Package List: 1 x spring steel platform 1 x rubber magnetic base Direct installation and use.