Περιγραφή
PH Meter With ATC 3 in 1 PH TDS Temp Tester High Accuracy Pocket Size PH Tester 0.00-14.00 For Pools, Drinking Water, Aquariums 40% Off
TDS/PH/EC/Temperature Meter 4 in 1
Measuring range: pH:0.00-14.00pH; TDS: 0-19990ppm; EC: 0-19990S/cm
Resolution: 0.01 pH; 1ppm; 1S/cm; 0.1; 0.1F
Accuracy: pH: +/-0.01 pH; TDS/EC: +/-2%; Temp: 0.5
Batteries: 3 * 1.5V LR44 button cell (not included)
Temp.: 0.1-60.0; 32.0-140.0F
Calibration: pH: three points automatic calibration (6.86 & 4.00 & 9.18pH); TDS: 1413S/cm; EC: 1413S/cm
Auto shut off: 5 Minutes
TDS/PH/Temperature Meter 3 in 1
Measuring range: pH:0.00-14.00 pH; TDS: 0-19990ppm
Resolution: 0.01 pH; 1ppm; 0.1; 0.1F
Accuracy: pH: +/-0.01 pH; TDS: +/-2%; Temp: 0.5
Batteries: 3 * 1.5V LR44 button cell(not included)
Temp.: 0.1-60.0; 32.0-140.0F
Calibration: pH: three points automatic calibration (6.86 & 4.00 & 9.18pH); TDS: 1413ppm
Auto shut off: 5 Minutes
PH/EC/Temperature Meter 3-in-1
Measuring range: pH:0.00-14.00 pH; EC: 0-19990S/cm
Resolution: 0.01 pH; 1S/cm; 0.1; 0.1F
Accuracy: pH: +/-0.01 pH; EC: +/-2%; Temp: 0.5
Batteries: 3 * 1.5V LR44 button cell(not included)
Temp.: 0.1-60.0; 32.0-140.0F
Calibration: pH: three points automatic calibration (6.86 & 4.00 & 9.18pH); EC: 1413S/cm
Auto shut off: 5 Minutes
How to Calibrate the PH Meter?
Take ph 6.86 standard solution calibration as an example:
1. Press the ON/OFF button to turn on the meter, and then press MODE/CAL button adjust the tester to pH mode;
2. Put the electrode into pH 6.86 standard solution, waiting for the readings to stabilize (usually 5~10 Seconds);
3. Press and hold the MODE/CAL button and release after 6 seconds;
4. Until the readings of pH 6.86 is no longer flashing, the calibration of pH 6.86 is completed;
5. Repeat the above steps if you need to calibrate pH 4.00 or pH 9.18.
How to make a standard solution?
Take ph 6.86 standard solution as an example:
1. Add the pH 6.86 buffer powder into beaker with 250ml of distilled water;
2. Stir until the powder has completely dissolved, then pH 6.86 standard solution is completed;
3. Repeat the above steps if you need to make other standard solutions.
How to use the pH meter?
1. Press the ON/OFF button to turn on the unit, and then press MODE/CAL button adjust the tester to pH mode;
2. Dip the electrode in the target solution, making sure the whole electrode is submerged;
3. Wait a few seconds for the reading to stabilize, and the LCD screen will display both temperature and PH value.
4. Dry the electrode with a cloth after use.
-
Fruugo ID:
351562295-765980995
-
EAN:
659470495047
Πληροφορίες για την ασφάλεια του προϊόντος
Δείτε τις πληροφορίες για την ασφάλεια του προϊόντος που περιγράφονται παρακάτω
Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.
Ετικέτες ασφάλειας προϊόντων
Προειδοποιήσεις για την ασφάλεια:
Please note that the product is safe under normal use conditions. However, improper use may lead to hazards such as damage, injury or other safety risks. Please read and follow the instructions carefully.This product complies with EU safety standards. However, for your safety, if any abnormality (such as strange smell, overheating, loose parts, etc.) is found during use, please stop using it immediately.In accordance with the EU General Product Safety Regulation, we remind you that this product is only suitable for [specific applicable people / scenarios]. Use in non - specified people / scenarios may bring potential safety hazards.
Παράδοση & Επιστροφές
Αποστέλλεται σε 12 μέρες
Αποστέλλεται από Κίνα.
Κάνουμε ό,τι καλύτερο μπορούμε για να εξασφαλίσουμε ότι τα προϊόντα που παραγγέλνετε αποστέλλονται σε εσάς πλήρως και σύμφωνα με τις προδιαγραφές σας. Παρ' όλα αυτά, αν παραλάβετε μία ελλιπή παραγγελία ή προϊόντα διαφορετικά από αυτά που παραγγείλατε ή αν υπάρχει κάποιος άλλος λόγος που δεν είστε ικανοποιημένοι με την παραγγελία, μπορείτε να την επιστρέψετε ολόκληρη ή κάποια προϊόντα από αυτή και να λάβετε πλήρη επιστροφή χρημάτων για τα προϊόντα. Προβολή πλήρους πολιτικής επιστροφών
