1、Easy To Solder: Replaces the traditional wire soldering solution and reduces the difficulty of soldering. Fully compatible with the host motherboard and shell, can be installed without damage, while avoiding the communicate interference caused by the host can not start, for Picoboot development board has copied the program. 2、For SD2SP2 Pro Adapter: Make sure there is a serial port 2 at the bottom of the for GC console and it can be read directly, for SD2SP2 Pro adapter needs to be used with for xeno, for GCloader Lite or for pcioboot, it will automatically load the Micro Storage Card game list, the maximum memory is 512GB, plug and play. 3、Compatible With For RPi: For RPi cable is highly compatible with various for RPi models, such as for RPi 4B 3B plus 3B 2B, etc, making it easy for users to access various devices. The cable is made of fine manufacturing techniques and premium materials for reliability and durability. 4、Device Expansion: With the for RPi cable, you can easily connect and expand for RPi with other devices, which can greatly increase the range and functions for RPi, just connect one end of the cable to the GPIO pins for RPi, and the other end to the device you need to use. 5、Compatible With Console Model: For RPi Picoboot FPC flex solder cable is designed specifically for GC DOL 001 game console and is resistant to compression and bending, with immersed gold solder joints for stable data transfer. With thermal pads for GC and double sided sticker for bending (compatible with for GC DOL 001 only). Item Type: Console Development Board Flex Cable Kit Material: PCB, Silicone Development Board Size: Approx. 5.1 x 2.1 x 0.4cm / 2 x 0.8 x 0.2in Development Board Interface: USB C Development Board Processor: Dual Core for Arm Cortex M0 Plus Processor Development Board Chip: For RP2040 Microcontroller Chip Development Board Onboard Flash Memory: 16MB Development Board SRAM: 264K Development Board Maximum Working Current: 500mA For SD2SP2 Pro Interface: Micro Storage Card (Maximum 512GB, Not Included) Silicone Thickness: 1 x 1mm / 0.04 x 0.04in Plus 1 x 1.5mm / 0.04 x 0.06in Plus 1 x 2mm / 0.04 x 0.08in Compatibility: For GC DOL 001 Console (Not Compatible with Other Models) 1 x Development Board 1 x Adapter 1 x Micro Storage Card Reader1 x Soldering Cable 3 x Silicone Thermal Pads 1 x Double Sided Sticker