Product Description: The QRPGuys 40m-10m UnUnTenna Plus is a compact portable wire antenna with a built-in tuner for backyard or portable SOTA use. It is similar in design to our UnUnTenna but this device also contains a tuner. The tuner section is based on the circuit designed by Lofgren, W6JJZ, also incorporating the Dan Tayloe (N7VE) SWR led indicator. The circuit was first designed for the Norcal QRP Club. It is rated at 10 watts PEP, and uses an integral 9: 1 voltage balun that matches your unbalanced 50 ohm impedance input to a 450 ohm impedance unbalanced long wire. The antenna has efficiency at 20m and be an S unit less in performance at the 40m and 10m ends. You use a non-resonate length of wire for the driven elements, typically 29, 35.5, or 41, and optionally a 1/4 wire for a counterpoise. It is designed to wind the attached wires onto the device to store it as a small compact unit. We provide all the components except the antenna wire and counterpoise wire. You use what you have available. We recommend anything from 20awg to 26awg. Two holes are provided to tie down or suspend the device depending on your circumstances. We provide all captive stainless steel hardware for the antenna and counterpoise connections. There is a board mounted female BNC for connection to your rig. On a difficulty scale of 1 to 5, 5 being the most difficult, this is rated at 2 or 3 depending on your experience. Product Description: type: B-Finished product Power: 10W Connector: BNC Material: PC+metal colour: green Package Contents: 1 x tunable long-wire antenna Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.