Features:_x000D_1.Moldcan be easily removed by applying this product. The gel texture can be used on vertical or inclined surfaces._x000D_2.Can make cleaning more fun and easier._x000D_3.Easy to use and quick removing._x000D_4.Ingredients: sodium hypochlorite, hydroxide, etc. Uses: mold, mildew, clean_x000D_5.Capacity: 120ml_x000D_Instructions:_x000D_1.Wipe the dust and moisture from the mold surface with a dry towel._x000D_2.Open the lid of the product and squeezes it about 3 mm thick at the mold. Leave it for 35 hours and wipe with water._x000D_3.Confirm the sterilization effect, if it is not completely removed, please repeat it._x000D_Precautions for use:_x000D_1.Do not use it outside the intended use._x000D_2.Keep ventilation when using. Rubber gloves are recommended._x000D_3.Cover the lid after use and keep out of reach of children._x000D_4.If you accidentally touch the skin or enter the eyes, please wash it with water immediately._x000D_5.If you accidentally eat, please immediately drink water and vomit and seek medical advice._x000D_6.Fading will appear on the clothes, please be careful._x000D_7.The part that is discolored or stained with metal yellow silica gel has no effect._x000D_8.According to the degree of pollution, the sterilization effect will be different._x000D_9.If the solution is frozen or close to the heat source, the solution will become thinner.Package List:_x000D_1 x Mold remover_x000D_