RF Skin Tightening Machine Microcurrent Anti Aging Wrinkle Removal RF Facial HIFU Beauty Device 100‑240V US Plug Item Type: Mini HIFU Beauty Machine Color: Black Procedure 1. Please clean your face before operation (if you have makeup, please remove it with cleansing oil first, and then wash your face with facial cleanser) 2. After the power is turned on, the instrument automatically enters the standby state. 3. Liquid level adjustment: After the power is turned on, the round knob on the top of the handle is used to adjust the level. Adjust counterclockwise to level 3 or 4.5, and clockwise to level 3 or 1.5. 4. Energy regulation: It is recommended that the first operation start from the lowest energy (minimum energy) instrument 1J, the highest is 9J) Step 1: test whether the energy is appropriate, first operate the instrument in the lower right corner. If you don't feel it, turn the energy up to level one or two until you can feel a slight heat or small tingling in the area being manipulated. A few people have pain near the periodontal area. Step 2: Test until you find the right energy intensity and start operating at that intensity. As you move to the nose section, lower it because the section where many of the bones are located is more sensitive and withstands a relatively low energy intensity. (Different parts may bear different strengths, adjust the energy according to their own conditions) After adjusting the liquid level and energy, apply the medium to the operated part and the operating probe, and then operate the instrument. During operation, the parts to be operated should be kept in the medium. If the medium is volatile, do not operate before replenishing the medium. Note that the probe must be firmly attached to the skin. There should be no space between the probe and the skin. The entire facial procedure takes about 30-45 minutes. The exact time depends on each person's face Operation technology: Neck: Use level 4.5/3.0 and operate from the lowest energy. Move the probe along the neck to the side of the clavicle to the lower jaw and operate at a fixed point, moving to the side 3-4 times, remembering that the position of the Adam's apple is not recommended Eyes: Use level 1.5, starting with the lowest energy. Move the probe sideways from the eye end to the temple, and operate at a fixed point from the pubic part to the end of the eyebrow, through the temple, avoiding the orbit, eyelids, eyebrows :(can be performed sideways 3-5 times) Face: Use level 4.5, starting with the lowest energy. Move the probe along the contour line to operate in the "#" shape. Use level 4.5 before using level 3.0 operations. If the nasolabial groove and corners of the mouth have deep wrinkles, you can use the 4.5 level operation 3-5 times (do not operate at a fixed point). Forehead: Using level 1.5, operating from the lowest energy, move the probe from the brow position to the side (fixed point operation) to the hairline. Work from the bottom up, from the brow to the hairline, from the brow to the hairline. Don't touch your eyebrows. Can be operated to the side 3-4 times)