Stepper Motor, TMC2225 MKS Stepper Motor Driver Board with Heat Sink Mute Motor Driver Module for 3D Printer

11,85 €
ΔΩΡΕΑΝ Αποστολή:

Stepper Motor, TMC2225 MKS Stepper Motor Driver Board with Heat Sink Mute Motor Driver Module for 3D Printer

  • Μάρκα: Unbranded
Πωλήθηκε από:

Stepper Motor, TMC2225 MKS Stepper Motor Driver Board with Heat Sink Mute Motor Driver Module for 3D Printer

  • Μάρκα: Unbranded

11,85 €

Αποθήκευση 12,40 € (51%)

Συνιστώμενη τιμή

24,25 €
Σε απόθεμα
ΔΩΡΕΑΝ Αποστολή:
Πωλήθηκε από:

11,85 €

Αποθήκευση 12,40 € (51%)

Συνιστώμενη τιμή

24,25 €
Σε απόθεμα
ΔΩΡΕΑΝ Αποστολή:

Δεχόμαστε τους ακόλουθους τρόπους πληρωμής

Περιγραφή

Features 256 SUBDIVISIONS: Continuing the characteristics of TMC series drivers, the chip is expanded to 256 subdivisions internally, with good mute effect. LARGER CURRENT: The driving current is larger, the maximum peak current is 2.5A, and the stable printing current is 1.7A, stable and reliable. WITH HEAT SINK: The stepper motor driver is equipped with heat sink to ensure good heat dissipation, lower heating efficiency and safe operation. ALUMINUM ALLOY: The heat sink is made of aluminum alloy, with light weight, corrosion resistance, wear resistance and long service life. FOR 3D PRINTER: The stepper motor driver module has ultra quiet operation, is a common accessory of 3D printer, easy to install and replace. Specification: Item Type: Stepper Motor Driver Module Material: Aluminum Alloy Output Current: 1.78A Recommended Working Current: 0.8A Microstep: 256 microstep subdivision Load Driving Voltage Range: 5.5-36V IC Logic Working Voltage: 3.3/5V Package List:1 x Stepper Motor Driver Module1 x Heat Sink Note:1. Pay special attention to the driving direction, and do not insert it reversely2. Do not connect the motor when measuring the voltage, otherwise it is easy to burn the motor,3. When measuring the voltage, connect the power supply, not just USB power supply,4. When using on the printer control board, please keep 3 jumper caps under the socket.5. Before adjusting the knob, it must be carried out under the condition of power off. After the adjustment is completed, the power on measurement shall be carried out to prevent the drive or main board from burning out6. When pasting the heat sink, please pay attention to the distance between the heat sink and the pin, otherwise it will cause a short circuit between the heat sink and the leading angle7. Under working conditions, please do a good job in heat dissipation (heat sink and cooling fan) to prevent the abnormal operation of the drive overheating Package List 1 x Stepper Motor Driver Module 1 x Heat Sink
  • Fruugo ID: 383858064-826105862
  • EAN: 9789622160422

Πληροφορίες για την ασφάλεια του προϊόντος

Δείτε τις πληροφορίες για την ασφάλεια του προϊόντος που περιγράφονται παρακάτω

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Ετικέτες ασφάλειας προϊόντων

CE Mark
Προειδοποιήσεις για την ασφάλεια: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
Συστατικά: As shown in the figure

Παράδοση & Επιστροφές

Αποστέλλεται σε 2 μέρες

  • STANDARD: ΔΩΡΕΑΝ - Παράδοση μεταξύ Πέμ 06 Νοεμβρίου 2025–Τετ 12 Νοεμβρίου 2025 - ΔΩΡΕΑΝ

Αποστέλλεται από Κίνα.

Κάνουμε ό,τι καλύτερο μπορούμε για να εξασφαλίσουμε ότι τα προϊόντα που παραγγέλνετε αποστέλλονται σε εσάς πλήρως και σύμφωνα με τις προδιαγραφές σας. Παρ' όλα αυτά, αν παραλάβετε μία ελλιπή παραγγελία ή προϊόντα διαφορετικά από αυτά που παραγγείλατε ή αν υπάρχει κάποιος άλλος λόγος που δεν είστε ικανοποιημένοι με την παραγγελία, μπορείτε να την επιστρέψετε ολόκληρη ή κάποια προϊόντα από αυτή και να λάβετε πλήρη επιστροφή χρημάτων για τα προϊόντα. Προβολή πλήρους πολιτικής επιστροφών