SVP-916 6A 10A 40A 63A 80A Over Voltage Protection Limit Current Dual Display Surge Protector 220V Automatic Voltage Relay Features:1.Over-voltage protection2.Under-voltage protection3.Over-current protection4.Voltage display(voltage measurement)5.Current display (current measurement)6.Over-voltage protection value adjustable7.Over-voltage recovery value adjustable8.Over-voltage protection action time adjustable9.Under-voltage protection value adjustable10.Under-voltage recovery value adjustable11.Under-voltage protection action time adjustable12.Over-current protection value adjustable13.Over-current protection action time adjustable14.Fault recovery delay time adjustable15.Delay time after power-on adjustable16.Reset mode selection17.Fault inquiry18.Restore factory settingFunctions:1.Over-voltage protection2.Under-voltage protection3.Over-current protection4.Automatic recovery5.Voltage display(voltage measurement)6.Current display (current measurement)Parameters:1.Model number:SVP916-40A2.Power supply:230VAC 50/60Hz3.Max.Loading power:1~40A Adjustabledefault:40A4.Over-voltage protection value range:221V~300~OFF(default:280V)Over-voltage recovery voltage range:220V--299V(default:250V)Over-voltage protection action time:0.1s~10s(default value:0.1s)5.Under-voltage protection value range:219V--150V --OFF(default:160V)Under-voltage recovery voltage range:151V--220V (default:180V)Under-voltage protection action time:0.1s~10s(default:0.1s)6.Over-current adjustment range:1-40A default:40AOver-current action range:0.1~512 second default:5.0s7.Recovery delay time:2s~120s(default:60s)8.Power-on delay time:2s~10s(default:2s)9.Power consumption : <2W10.Electric machinery life : 100,000 times11.Installation:35mm DIN railNoted:1.Pre SET for 3 seconds, please pre continuously SET to adjust the required parameter value as follows, or to adjust the setting value . When END appears, pre SET again, the data will be saved and valid.2. Voltage indicator: The voltage indicator flashes quickly in case of over-voltage, slowly in case of under-voltage, and it is constantly on in case of normal voltage.3.Current indicator: The current indicator flashes in case of over-current, and it is constantly on when current is normal.4.Sign of warranty period :During the warranty period, the voltage indicator and the current indicator are constantly on. After the warranty period, they are off under the normal conditions. Only when the over-voltage or the under-current occurs, they will flash.5.After preing Set, if there is no operation within 10 seconds, the device status will be automatically exited, and the changed parameters will not be saved.6.Pre "" and "" together for 3 seconds, and the LED below will be off for 1 second, indicating that the default parameter value of restoring factory settings is completed.Package:1.Voltage protector SVP-916-40A2.Manual instructions in English