How to train for TPMS tire pressure monitor sensors? 1. Turn the ignition switch to the OFF position, then press and release the brake pedal. 2. Cycle the ignition switch from the OFF position to the run position three times, ending in the run position. 3. Press and release the brake pedal. 4. Turn the ignition switch to the OFF position. 5. Turn the ignition switch from the OFF position to the RUN position three times, ending in the RUN position. The horn will sound once and the TPMS indicator will flash if the training mode has been entered successfully. If equipped, the message center will display TRAIN LF tire. 6. Place the tire pressure monitor activation tool on the left front sidewall (driver's side) of the tire at the valve stem. Press and release the test button repeatedly on the TPMS tool until the horn beeps. (It may take up to 6 seconds for the tool to activate the sensor; leave the tool in place for the full 6 seconds.) The beep indicates that the body control module has recognized the TPMS sensor. 7. Within 2 minutes of the horn confirming the programming of the LF tire, place the TPMS tool on the right sidewall (passenger side) of the front tire at the valve stem and press the test button to activate the sensor. 8. Repeat step 7 for the right rear tire, followed by the left rear tire in that order. The procedure is completed after programming the last tire. When training is complete, the message center (if equipped) will display TIRE TRAINING COMPLETE. Interchange Part Number: TPMS-19, 8C2Z-1A203-A Support Models: 2007–2016 for F-150 2008–2016 for F-450, F-550 Super Duty 2007–2016 for Flex 2007–2014 for Edge 2006–2016 for Escape 2008–2016 for Expedition 2006–2016 for Explorer 2008–2015 for MKX 2008–2016 for Taurus 2008–2016 for E-150, E-250, E-350, E-450 Econoline 2008–2016 for Fiesta 2008–2016 for Fusion 2008–2016 for MKZ 2008–2011 for Crown Victoria 2011–2016 for Transit Connect 2006–2011 for Ranger Color: White Material: Plastic Package Contents: 1 x Tire Pressure Sensor Note: If the vehicle or wheels/sensors have been stationary for more than 30 minutes, the sensors will enter sleep mode to conserve battery power. They can be awakened by moving the tires or rolling the vehicle slightly before initiating communication. Note: The TPMS training procedure should be performed on one vehicle at a time in an area free of radio frequency interference, with at least 3 feet of separation from other vehicles equipped with TPMS sensors. Note: Vehicles with different front-to-rear tire pressures, such as F-Series trucks and E-Series vans, require TPMS relearning after tire rotation. If sensors are not properly trained, the TPMS warning light will illuminate on the instrument panel. Only the above package content is included; other products are not included. Note: Lighting and display differences may cause slight variations between the color of the item in the image and the actual product. Measurement error allowance is +/- 1–3 cm.