Use A Normal USB Flash Drive As The Medium For The fer Design. 34pin Floppy Drive Interface, 5V DC Power Supply, Easy To Install. 1000 Partitions From A USB Flash Drive Can Be Used.Built-In Self-Formatting. Floppy Drive With 34pin Connector And 5v Dc Power Plug.Use A 2hd Floppy Disk With A Capacity Of 1.44mb. Disk Format:Number Of Cylinders:80, Tracks:160 Sectors/Tracks 18 Bytes/Sector:512 Data fer Rate:500 Kbps Encoding Method:MFM Control Board: 8 Segment Number:Represents The Partition Number Green Led:Read And Write Operation Status Usb Port:Connect A USB Flash Drive Button: The Left Button Is Used To Go Up Ten Digits, The Right Button Is Used To Go Up Ten Digits, And Pressing The 2 Buttons At The Same Time Is Ok Rise To 100 Places Format The Usb Flash Drive. 1. Format Usb Flash Drive As 1000 Partitions With The Built-In Self-Formatting Feature 2. Install The Emulator On Your Computer And Format Each Partition By Operating Driver A. 3. Using The Emulator Ufa1m44-100, Insert The Usb Flash Drive Into It, Connect To The Computer, For Windows Xp/2000/7, It Will Be Recognized As Removabe Driver A Or B, Formatting Each Partition. The Ufa1m44-100 Also Has Built-In Self-Formatting. Read And Write Data. 1. Install The Emulator On Your Machine 2. Install The Emulator On Your Computer 3. Connect A USB Flash Drive On Your Computer To Read And Write Data Directories Through Software, For Windows XP/2000 4. Using The Emulator Ufa1m44-100, Insert It Into A Usb Flash Drive, Connect It To A Computer, Read And Write Data Under Windows Xp/2000/7. Need Attention:Jumpers Are Not Supported Colour:Black Material:ABS Package Contents: 1 * Host 1 * CD 2 * Jump Cap 4 * Screw Only the above package content, other products are not included. Note: Light reflection and different di