Ten products is DC CNC electronic load, with 150W power and 20A maximum supply current. 2,4 inch TFT color screen, with four operating modes, fixed effect mode, automatic power mode, power addition mode and resistance mode. Power protection, amplification and power amplification can be customized; discharge power supply and discharge time can be turned on. Multifunctional design, system menu interface supporting between language and Chinese, data zeroing, power and power zeroing without, gain and current calibration, 9 levels of screen adjustment, standby time setting and factory parameter restoration. Features: Ten products is DC CNC electronic load, with 150W power and 20A maximum supply current. 2,4 inch TFT color screen, with cumulative working time, core temperature with load, sensor monitoring temperature, current, power, electricity, capacitance, higher resistance, charge, operating mode, OVP, OCP, OPP, power supply, function release time limit. It has four operating modes, constant effect mode, effective mode, power addition mode and resistance mode. Power protection, amplification and power amplification can be customized; discharge power supply and discharge time can be turned on. The supply temperature can be monitored by an external NTC sensor. Multifunctional design, system menu interface supporting between language and Chinese, data zeroing, power and power zeroing without, gain and current calibration, 9 levels of screen adjustment, standby time setting and factory parameter restoration. The independent product with independent 12.0V1A power supplies and is equipped with a single silent (20±3dBA) aluminum radiator, with an intelligent temperature control system controlling the operation of the radiator fan. In the range with safe analog electronic wires, this creates a protection mode and then an operating mode to control the discharge, which can effectively protect the power supply from external shutdown. It adopts four-wire wiring method, increasing the power supply of the wire does not affect the power measurement, so that the power measurement is more accurate, the four-wire system is connected downwards with the two-wire connection method, while the wiring only you should perform the short action A and V, V- and A - respectively. Technical data: Name: Electronic Load Material: Printed board Fee Type: CNC Electronic Fee Weekly voltage: 12VDC with 12V, 1A power supply Supply Voltage: 0-150VDC Strength Current: 0-20A Power supply: 0-150W (max. 60W above 120V) Wiring method: four-wire system A V V- A-, reverse with two-wire system Maximum power measurement: 999,999 Wh Maximum measurement: 999.999Ah Cumulative time range: ddd:hh:mm:ss (days:hours:minutes:seconds) Operating modes: four modes CC-mode natural current CV-mode real gain CP-mode additional power CR-mode additional resistance Surge protection: support surge protection up to 150 V Overcurrent protection: support overcurrent support up to 20A Protection against surgical compensation: providing support before surgical treatment up to 150 W Limited power release: Timeout discharge: support up to 99 hours: 59 minutes timeout release Heatsink: Integrated silent heatsink (20±3dBA) alloy Temperature 240°C, automatic operation External temperature measurement: NTC 3950 10K 1% temperature sensor connection to measure and display temperature in the range of 0-100°C Switching Chinese and English: A Trick Zeroing all data: Communications Zeroing Power and Power: Amplifier Usability Calibration: Supported Current calibration configuration: support from the screen side: support Investigating screen hibernation based on source: Support Online computer software: not supported Factory Reset: Support Product Size: 165*95*80mm/6.50*3.74 * 3,15 inch Item Weight: 400 g / 0,88 lb Package Weight: 625 g / 1,38 lb List of things to pack: 1 * electronic fee 1 * Adapter 2 * Clamp Wire