1. If the control unit does not have a key, the transponder is programmed by a rotation of the Zed BULL. Zed BULL currently has 55 different applications, and the number is constantly increasing... You can program, find PIN codes and use car equipment. This function does not require expensive pre coding transponders and costs about 8 10 euros. You can use an empty transponder.<br> 2. 44 (Unlocked) and 45 () Transponders are considered uncopiable and can be copied with Zed BULL. Hitag2 transponder program: If you own Zed BULL, you get the Hitag2 programming feature for . You can use Hitag2 transponders and improve your work.<br> 3. Cloning transponders: 11, 12, 13, 33, 73, 4C (written on the electronic 4C key and battery TPX1 transponders), Crypto 40 (partial), 41 (all), 42 (all), 44 (all unlock), 45 (all). Common transponders cloning tools can only copy installed transponders. But we started with Zed gear and increased with the increase of Zed BULL. 7.5, 8.5,<br> 4. Find the PIN code of EEPROM and MCU, prepare pre coded transponders and programmed transponders. The Zed BULL PC software has excellent features that help you use EEPROM applications. ECU image, MCU or EEPROM and position of the mcu or eeprom on the board that uses transponder... makes your work easier. Automatic module search () automatically identifies the module when selecting an EEPROM file<br> Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-DIMEANI official store