Feature : 1 . Intelligent automatic irrigation device, dual pump Wi-Fi connection, remote control via mobile app, regardless of distance, you can water the plants manually or automatically at any time. 2 . Pump and B pump can be controlled separately, double pump design, independent operation, watering installation classification, watering more plants. 3. WiFi connection, APP control, IOS and Android compatible. For details, please refer to the manual (Support 2.4G frequency band, WIFI 5G frequency band is not supported temporarily) 4 . Water thoroughly. You can freely set the watering interval, watering frequency and amount of each watering. 5 . With power-off memory function. Don't worry about resetting previously set data after a power failure. Specification: Item Type: Intelligent Flower Watering Device Material: ABS PP silicone Product size: 8.3 x 8.3 x 9.5 cm / 3.3 x 3.3 x 3.7 inches Input voltage: AC100-240V, 50 / 60Hz Output voltage: 5V, 1A Weight: approx. 820g / 28.9oz Pump housing damping material: silicone Working temperature: 0-50 Adapter: DC 5V 2A DC002 3.5 / 1.3 (line length 1.2 meters) Maximum water pressure: 30 pai (200 kPa) Flow: 0.3-0.8LPM Noise: 65db (30cm distance) Pump head: 2.5m / 8.2ft Pump Suction: 2m / 6.6ft WIFI: 2.4 GHz APP: for eWeLink Package List : 1 x Watering Timer 1 x Power Adapter 1 x USB cable 20 x water dripper 20 x tee joint 1 x hose (15 meters) 2 x filters 1 x Phillips screwdriver 1 x Manual How to use: 1 . Download the application: Search for eWebLink on the mobile phone, download and install the application. 2 . If you already have an e-micro account registered, you can enter your account to login. 3. Connect the device: Turn on the sprinkler to keep the same Wi-Fi signal as your mobile phone and make sure the Wi-Fi frequency is 2.4 GHz. At this point, the blue signal indicator lights up and the different blink patterns represent different states as shown below: 2 Short and 1 long: pairing mode Continuous fast flashing: compatible pairing mode Slow flashing: offline / not connected Steady light: networking When you turn on an unpaired device, it is in pairing mode by default (2 short and 1 long). Press and hold any setting button for 5 seconds to enter compatible pairing mode (continuous fast flashing); In offline mode (slow blinking) press and hold any setting button for 5 seconds to enter pairing mode (2 short and 1 long). 4 . Setting parameters: After clicking SET / MA, pump A will start manually; Pump B will start manually after clicking SET / MB; press and hold the button for 5 seconds to switch the pairing mode.